|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
CPC1972 AC Power Switch Parameter Blocking Voltage Load Current On State Voltage Drop Operating Voltage Ratings 800 250 3 550 Units VP mArms Vrms (at IL = 250 mArms) Vrms Description The CPC1972 is an AC Solid State Switch using optical coupling with dual power Silicon Controlled Rectifier (SCR) outputs to produce an alternative to optocoupler and Triac circuits. The CPC1972 switches are robust enough to provide a blocking voltage of up to 800VP. In addition, tightly controlled zero cross circuitry ensures switching of AC loads without the generation of transients. The input and output circuits are optically coupled to provide 3750Vrms of isolation and noise immunity between the control and load circuits. As a result the CPC1972 is well suited for industrial environments where electromagnetic interference could disrupt the operation of electromechanical relays. Features * * * * * * * * * * * Load Current up to 250mArms 800VP Blocking Voltage 5mA Sensitivity Zero-Crossing Detection DC Control, AC Output Optically Isolated TTL and CMOS Compatible Low EMI and RFI Generation High Noise Immunity Machine Insertable, Wave Solderable Flammability classification rating of V-0 Approvals * UL 508 Recognized Component: File #: E69938 * CSA Certified Component: Certificate # 1172007 * EN/IEC 60950 Compliant Applications * * * * * * * * * * Programmable Control Process Control Power Control Panels Remote Switching Gas Pump Electronics Contactors Large Relays Solenoids Motors Heaters Ordering Information Part Number CPC1972G CPC1972GS CPC1972GSTR Description 6-Pin DIP (50/Tube) 6-Pin Surface Mount (50/Tube) 6-Pin Surface Mount (1000/Reel) Pin Configuration 1 + LED - LED N/C 2 3 ZC 6 5 4 AC Load N/C AC Load Pb RoHS 2002/95/EC e3 www.clare.com 1 DS-CPC1972-R03 CPC1972 Absolute Maximum Ratings Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Package Dissipation 2 Isolation Voltage Input to Output Operational Temperature Storage Temperature 1 2 Ratings 800 5 50 1 150 800 3750 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Derate Linearly 1.33 mW/C Derate Linearly 6.67 mW/C Electrical absolute maximum ratings are at 25C Electrical Characteristics Parameters Output Characteristics @ 25C Operating Voltage Range Load Current Continuous Peak Off State Leakage Current On-State Voltage Drop Critical Rate of Rise Holding Current Switching Speeds Turn-on Turn-off Zero-Cross Turn-On Voltage 1 Operating Frequency Load Power Factor for Guaranteed Turn-On 2 Input Characteristics @ 25C Input Control Current 3 Input Voltage Drop Input Drop-out Voltage Reverse Input Current Common Characteristics @ 25C Input to Output Capacitance 1 2 3 Conditions t = 10ms VL=800V IL = 250mArms IF=5mA Symbol VL IL ITSM ILEAK VON dV/dt IH tON tOFF PF IF VF IR CI/O Min 5 5 500 20 0.25 0.9 0.8 - Typ 300 5 1 1.2 3 Max 550 250 2 1 3 0.5 0.5 20 500 5 1.4 10 - Units Vrms mArms AP A Vrms V/s A IF=5mA 1st half-cycle Subsequent half-cycle f=60Hz IF=5mA VR=5V - cycles V V Hz mA V V A pF Zero Cross 1st half-cycle @ <100Hz Snubber circuits may be required at low power factors. For high noise environment use at least 10mA LED current 2 www.clare.com R03 CPC1972 PERFORMANCE DATA* Typical LED Forward Voltage Drop (TA=25C, IF=5mA) Typical On-State Output Forward Voltage Distribution (TA=25C) Typical Blocking Voltage Distribution (TA=25C) 35 30 Device Count (N) 35 30 Device Count (N) 35 30 Device Count (N) 25 20 15 10 5 0 25 20 15 10 5 0 1.21 1.22 1.23 1.24 1.25 LED Forward Voltage Drop (V) 25 20 15 10 5 0 1.89 1.91 1.93 1.95 1.97 1.99 Output Voltage Drop (Vrms) 2.01 857 858 859 860 861 862 863 Blocking Voltage (VP) 25 20 15 10 5 0 Typical IF for Switch Operation (TA=25C) 450 400 Load Current (mArms) 350 300 250 200 150 100 50 0 1.30 1.35 1.40 1.45 1.50 1.55 LED Current (mA) 1.60 -40 Typical Maximum Load Current vs. Temperature 0.7 0.6 Leakage (A) 0.5 0.4 0.3 0.2 0.1 0.0 -20 0 20 40 60 80 Temperature (C) 100 120 Typical Leakage vs. Temperature (VL=800VP) Device Count (N) I F =5mA -40 -10 20 50 Temperature (C) 80 Typical Blocking Voltage vs. Temperature 975 3.1 2.8 2.5 Typical Output Voltage Drop vs. Temperature LED Forward Voltage Drop (V) 1.6 1.5 1.4 1.3 1.2 1.1 Typical LED Forward Voltage Drop vs. Temperature Blocking Voltage (VP) 950 Von (Vrms) 925 900 875 850 825 2.2 1.9 1.6 1.3 1.0 IL=250mArms I F = 50mA I F = 30mA I F = 20mA I F = 10mA I F = 5mA -40 -20 0 20 40 60 80 100 120 Temperature (C) -40 -10 20 50 Temperature (C) 80 -40 -10 20 50 Temperature (C) 80 Typical IF for Switch Operation vs. Temperature 2.4 2.1 Maximum Surge Current (non-repetitive) (TJ=50C max) 3.0 Peak Surge Current (A P) 2.5 2.0 1.5 1.0 0.5 0 LED Current (mA) 1.8 1.5 1.2 0.9 0.6 0.3 0.0 -40 -10 20 50 Temperature (C) 80 10 50 Pulse Duration (ms) 100 *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.clare.com 3 CPC1972 Manufacturing Information Soldering For proper assembly, the component must be processed in accordance with the current revision of IPC/JEDEC standard J-STD-020. Failure to follow the recommended guidelines may cause permanent damage to the device resulting in impaired performance and/or a reduced lifetime expectancy. Washing Clare does not recommend ultrasonic cleaning or the use of chlorinated solvents. Pb RoHS 2002/95/EC e3 MECHANICAL DIMENSIONS 6-Pin DIP Thru-Hole Package 8.382 0.381 (0.330 0.015) PC Board Pattern 2.54 0.127 (0.100 0.005) 7.239 TYP (0.285 TYP) 6 - 0.800 DIA. (6 - 0.031 DIA.) 2.540 0.127 (0.100 0.005) 7.620 0.127 (0.300 0.005) 6.350 0.127 (0.250 0.005) 9.144 0.508 (0.360 0.020) 1.651 0.254 (0.065 0.010) 7.620 0.254 (0.300 0.010) 0.254 TYP (0.010 TYP) 6.350 0.127 (0.250 0.005) 5.080 0.127 (0.200 0.005) 3.302 0.051 (0.130 0.002) 4.064 TYP (0.160 TYP) 0.457 0.076 (0.018 0.003) Dimensions mm (inches) 6-Pin Surface Mount Package ("S" Suffix) 8.382 0.381 (0.330 0.015) 0.635 0.127 (0.025 0.005) 2.54 0.127 (0.100 0.005) Recommended PCB Land Pattern 2.54 (0.10) 9.524 0.508 (0.375 0.020) 6.350 0.127 (0.250 0.005) 7.620 0.254 (0.300 0.010) 1.65 (0.0649) 8.90 (0.3503) 0.457 0.076 (0.018 0.003) 1.651 0.254 (0.065 0.010) 0.254 0.0127 (0.010 0.0005) 0.65 (0.0255) 4.445 0.254 (0.175 0.010) 3.302 0.051 (0.130 0.002) Dimensions mm (inches) 4 www.clare.com R03 CPC1972 Tape and Reel Packaging for 6-Pin "S" Suffix Parts 330.2 Dia (13.00 Dia) Top Cover Tape Thickness 0.102 Max (0.004 Max) Top Cover Tape K0 = 4.90 (0.19) K1 = 3.80 (0.15) Embossed Carrier W = 16.00 MAX (0.63 MAX) B0 = 10.10 (0.400) P = 12.00 (0.472) A0 = 10.10 (0.400) User Direction of Feed Dimensions mm (inches) Embossment NOTE: Tape dimensions not shown comply with JEDEC Standard EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. Specification: DS-CPC1972-R03 (c)Copyright 2009, Clare, Inc. All rights reserved. Printed in USA. 7/20/09 5 |
Price & Availability of CPC1972GSTR |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |